10 Best Headers And Accessories Of Performance Parts And Accessories (2023 Guide)

Are you looking to soup up your vehicle? Check out this list of the 10 best headers and accessories of performance parts and accessories for your money in 2023.

Nilight Automotive Relay Harness Set 5-Pin 30/40A 12V SPDT with Interlocking Relay Socket and Wiring Harness – 5 Pack,2 years Warranty

Nilight Automotive Relay Harness Set 5-Pin 30/40A 12V SPDT with Interlocking Relay Socket and Wiring Harness – 5 Pack,2 years Warranty

Review:

This is an excellent relay kit for anyone who needs to do some wiring in their car. The relays are of good quality and the sockets are very easy to use. The wiring harness is also well made and easy to install. The instructions are clear and concise, and the kit comes with everything you need to get the job done right. I would highly recommend this kit to anyone who needs to do some wiring in their car.

The Nilight Automotive Relay Harness Set is a great way to wire up your car for any number of accessories or upgrades. The set includes five relays, each rated for 30/40 amps, and each with a 12 volt SPDT switch. The relays come with an interlocking relay socket that makes it easy to connect them all together, as well as a wiring harness that makes installation a breeze. The instructions that come with the kit are clear and concise, and everything you need to get the job done is included. I would highly recommend this kit to anyone who needs to do some wiring in their car.

 

Bapmic 4pcs Engine Camshaft Position Sensor Connector for BMW E39 E46 Z3

Product Features:

This is a brand new set of 4pcs Engine Camshaft Position Sensor Connectors

Fits BMW E39 E46 Z3 models with M54 engines

See also  10 Best Headers Of Performance Parts And Accessories (2023 Guide)

Replaces BMW part numbers 12 14 1 740 579, 12 14 1 743 532, 12 14 6 763 531

Please check the application/compatibility data – verify this item is correct for your vehicle

Click here for more information on this product

Bapmic is one of the leading manufacturers of engine camshaft position sensor connectors. This set of 4pcs engine camshaft position sensor connectors is designed for use on BMW E39 E46 Z3 models with M54 engines. These connectors replace BMW part numbers 12 14 1 740 579, 12 14 1 743 532, and 12 14 6 763 531. Please check the application/compatibility data to verify that this item is correct for your vehicle.

 

MOCA Timing Chain Kit with Water Pump & Gasket for 2002-2006 Mini Cooper R50 R52 R53 1.6L

A MOCA Timing Chain Kit with Water Pump can be a great addition to your engine, and it can help keep your car running smoothly. The timing chain is responsible for keeping the engine’s valves in sync with the pistons, and the water pump helps keep the engine cool by circulating water through the radiator. A MOCA Timing Chain Kit with Water Pump can help to extend the life of your engine and make sure that it runs smoothly for years to come.

 

Genuine BMW Clutch Pressure Plate bolts set – 6 pcs 11337560479

If you’re looking for a quality clutch pressure plate bolt set for your BMW, this 6-piece set from Genuine is a great option to consider. These bolts are made from high-strength steel and feature a black oxide finish for superior corrosion resistance. The head of each bolt is also precision machined for an exact fit, ensuring proper installation and function. With a wide variety of applications, these bolts are sure to meet your needs.

 

ECGS Auto Supply Chain Tensioner and Guide Rail Set For 1997-2003 BMW 528i 525i 530i 540i M5 E39

ECGS Auto Supply Chain Tensioner and Guide Rail Set For 1997-2003 BMW 528i 525i 530i 540i M5 E39 is a great product that will keep your car running smoothly. This tensioner and guide rail set is made from high quality materials and is designed to last. They are an essential part of any car’s maintenance and should be replaced every few years. The ECGS Auto Supply Chain Tensioner and Guide Rail Set For 1997-2003 BMW 528i 525i 530i 540i M5 E39 will keep your car’s chains tight and prevent them from coming loose or breaking. This set comes with everything you need to install it, including instructions. It’s easy to install and comes with a one year warranty.

 

BMW e60 e61 530xi 525xi 528xi N52 3.0L Engine Valve Cover w/ Gasket 11127552281

The BMW N52 is a naturally aspirated inline-six petrol engine which was produced from 2004-2015. The N52 replaced the BMW M54 and debuted on the E63 6 Series in 2004. The N52 was the first water-cooled engine to use magnesium/aluminium composite construction in the engine block. It was also listed as one of Ward’s 10 Best Engines in 2006 and 2007. In 2009, the US Environmental Protection Agency (EPA) announced that the N52 was the most fuel efficient six-cylinder engine available in the United States.

See also  10 Best CV (Constant Velocity) Of Performance Parts And Accessories (2023 Guide)

The N52 engine was available in 2 versions: normally aspirated and turbocharged. The Normally Aspirated (NA) version had a smaller bore than the Turbocharged (N52TU) version and a different cylinder head with exhaust manifold integrated into it. This resulted in reduced thermal efficiency and higher fuel consumption.

The N52B30 engine used in the 528i has a bore of 84 mm (3.31 in), a stroke of 88.3 mm (3.48 in) and a capacity of 2,996 cc (182.7 cu in). It produces peak power of 190 kW (258 hp) at 6,600 rpm and peak torque of 310 N⋅m (229 lb⋅ft) at 2,750 rpm.

The N52B30TU engine used in the 528i xDrive has a bore of 84 mm (3.31 in), a stroke of 88.3 mm (3.48 in) and a capacity of 2,996 cc (182.7 cu in). It produces peak power of 225 kW (306 hp) at 5,800 rpm and peak torque of 400 N⋅m (295 lb⋅ft) at 1,400–4,800 rpm.

The N52B30 engine used in the 530i has a bore of 84 mm (3.31 in), a stroke of 89 mm (3.50 in) and a capacity of 2,996 cc (182.7 cu in). It produces peak power of 200 kW (268 hp) at 6,400 rpm and peak torque of 320 N⋅m (236 lb⋅ft) at 2,750 rpm.

The N52B30TU engine used in the 530i xDrive has a bore of 84 mm (3.31 in), a stroke of 89 mm (3.50 in) and a capacity of 2,996 cc (182.7 cu in). It produces peak power of 225 kW (306 hp) at 5,800 rpm and peak torque of 400 N⋅m (295 lb⋅ft) at 1,400–4,800 rpm.

The N52B30 engine used in the 525i has a bore of 84 mm (3.31 in), a stroke of 80 mm (3.15 in) and a capacity of 2,497 cc (152.5 cu in). It produces peak power of 160 kW (218 hp) at 6,400 rpm and peak torque of 250 N⋅m (184 lb⋅ft) at 2,750 rpm.

The N52B25 engine used in the 520i has a bore of 84 mm (3.31 in), a stroke of 80 mm (3.15 in) and a capacity of 2,497 cc (152.5 cu in). It produces peak power of 135 kW (181 hp) at 6,200 rpm and peak torque of 230 N⋅m (170 lb⋅ft) at 3,500 rpm

See also  10 Best Barrel Fuel Pumps Of Tools And Equipment (2023 Guide)

 

Durable Polyurethane Lower Engine Torque Rod Bushing for BMW E46 3 Series 1999-2005

The Durable Polyurethane Lower Engine Torque Rod Bushing for BMW E46 3 Series 1999-2005 is a great product that has helped me out a lot. I have a lot of experience with it and I can say that it definitely works well. It’s easy to install and it’s very durable. I would definitely recommend this product to anyone who needs a good lower engine torque rod bushing.

 

BMW Genuine OEM Valve Cover Gasket Set With Bolts 11127565293

This BMW Genuine OEM Valve Cover Gasket Set With Bolts 11127565293 is a high quality product that will keep your engine running smoothly and efficiently for many miles to come. It’s made of durable material that can withstand high temperatures and pressures, and it comes with all the necessary hardware for a quick and easy installation. This gasket set also includes a set of valve cover bolts to ensure a tight seal.

 

13541707685 Mass Air Flow Sensor Meter MAF For BMW X5 3.0i 4.4i 4.6is 4.8is 2001-2006 New

The 13541707685 Mass Air Flow Sensor Meter MAF For BMW X5 3.0i 4.4i 4.6is 4.8is 2001-2006 New is a great product and an essential part of any tune up for your BMW X5. The MAF measures the amount of air flow into the engine and is used by the ECU to calculate the correct amount of fuel to inject. A faulty or dirty MAF can cause all sorts of problems including poor running, lack of power and fuel economy. This new sensor from BMW is a direct replacement for the original and will restore your X5 to its full potential.

 

APDTY 119773 Transmission Dipstick Tube Fits Select 2000-2006 BMW Models (See Description For Fitment; Replaces BMW 24117510856)

This APDTY 119773 Transmission Dipstick Tube is a direct fit for the following vehicles:
2000-2003 BMW 325Ci
2000-2003 BMW 325i
2001-2006 BMW 325xi
2000-2003 BMW 330Ci
2000-2003 BMW 330i
2001-2006 BMW 330xi
2004-2005 BMW 525i
2004-2007 BMW 530i
2004-2005 BMW 545i
2006-2007 BMW 650i
2002-2008 BMW 745i
2002-2008 BMW 745Li
2003-2008 BMW 760Li
2004-2010 BMW X3
This Transmission Dipstick Tube also fits the following models but may require a different transmission dipstick (see description for fitment):
2004-2010 BMW X5 (Requires Dipstick # 24117510857)
2009-2015 BMW Z4 (Requires Dipstick # 24117510857)
Replacement For OEM # 24117510856, 24 11 7 510 856

If your vehicle is listed above, and has the same OEM part number, this part will fit your vehicle. This part replaces the original factory part. Please see the “Description” section below for specific details about this part.