You can never go wrong when you upgrade your car with the best idle speed control of performance parts and accessories.
Table of Contents
HPI Racing 86155 Speed Control Knob
HPI Racing 86155 Speed Control Knob:
This is an HPI Racing speed control knob for use with their line of RC cars and trucks. It is a direct replacement for the stock knob that comes with the vehicle, and is also compatible with other aftermarket radio systems that use the same size and style of knob. This particular model is made from high-quality aluminum and has a black anodized finish for durability and good looks. It is a simple upgrade that can add a touch of style to your ride.
HPI Racing makes some of the best RC cars and trucks on the market, and this speed control knob is just one example of their attention to detail and quality craftsmanship. This knob is precision machined from aluminum for strength and durability, and then given a black anodized finish for good looks. It’s a simple upgrade that can make a big difference in the way your car or truck looks, and it’s also fully compatible with other aftermarket radio systems. If you’re looking for a way to add a little extra style to your ride, then this is definitely the way to go.
Innovate Motorsports MTX-L Digital Air/Fuel Ratio Gauge
Innovate Motorsports MTX-L Digital Air/Fuel Ratio Gauge
The Innovate Motorsports MTX-L Digital Air/Fuel Ratio Gauge is one of the most essential tools that any tuner or engine builder can have. It is a wideband O2 sensor and controller system in one convenient unit, and it is much more accurate than the narrowband O2 sensors that are found in most factory cars. This gauge is a must-have for anyone who is serious about tuning their engine for maximum performance.
The MTX-L features a Bosch LSU 4.9 wideband O2 sensor, which is capable of measuring AFR from 10:1 all the way down to 20:1. The included LogWorks software makes it easy to datalog your AFR readings so that you can see how your engine is performing over time. The MTX-L is also compatible with the popular DynoJet Power Commander fuel injection controllers, so you can use it to fine tune your fuel map for optimum performance.
Installation is a snap, thanks to the included universal bung and plug kit. The MTX-L can be mounted in a variety of locations, and the included wiring harness makes it easy to wire up to your existing engine management system.
If you’re serious about building a high performance engine, the Innovate Motorsports MTX-L Digital Air/Fuel Ratio Gauge is an essential piece of equipment. It’s accurate, easy to install, and it works with a variety of popular aftermarket engine management systems.
AEM 30-4110 Digital Boost Pressure Gauge
AEM’s 30-4110 Digital Boost Pressure Gauge combines an easy-to-read digital LED readout with a needle pointer for quick reference of boost pressure. The digital LED readout can be toggled between English and metric units, and the gauge has a peak recall function to help you keep tabs on your engine’s performance. The gauge is illuminated by a bright white LED light, making it easy to read even in direct sunlight. The included mounting hardware makes installation quick and easy.
The AEM 30-4110 Digital Boost Pressure Gauge is a great way to keep track of your engine’s performance. The digital LED readout is easy to read, even in direct sunlight, and the needle pointer provides quick reference of boost pressure. The gauge is illuminated by a bright white LED light, making it easy to read even in direct sunlight. The included mounting hardware makes installation quick and easy.
Greddy Performance Products Turbo Timer Type S
Greddy Performance Products Turbo Timer Type S is a product that provides an easy and accurate way to time your turbocharged car. This product is very simple to use and only requires two wires to be connected to your car’s battery. The Greddy Performance Products Turbo Timer Type S has a large, easy-to-read LCD screen that displays the current time, as well as the time remaining on the timer. The Greddy Performance Products Turbo Timer Type S also features a built-in turbo timer that can be set for up to 60 minutes. This product is very easy to install and comes with all of the necessary hardware and instructions.
The Greddy Performance Products Turbo Timer Type S is a great product for anyone who has a turbocharged car. This product is very simple to use and is very accurate. The Greddy Performance Products Turbo Timer Type S is a great addition to any turbocharged car and will help keep your car running correctly.
HKS Turbo Timer Type 0
The HKS Turbo Timer Type 0 is a must-have accessory for any car with a turbocharged engine. It keeps the engine running for a preset amount of time after the ignition is turned off, allowing the turbocharger to cool down properly and preventing oil from condensing in the turbocharger. This prevents damage to the turbocharger and extends its lifespan.
The HKS Turbo Timer Type 0 is easy to install and use. It has a large, easy-to-read display and simple controls. The timer can be set for anywhere from 1 to 30 minutes, and it will automatically shut off the engine after that time has elapsed.
The HKS Turbo Timer Type 0 is an essential accessory for any car with a turbocharged engine. It helps to extend the life of the turbocharger by preventing damage from oil condensation, and it also makes sure that the turbocharger has time to cool down properly after the ignition is turned off. This is a must-have accessory for any car with a turbocharged engine, and it’s easy to see why.
Blitz Dual Turbo Timer
Review
I have been using this timer for about a month now on my car and I absolutely love it! It was very easy to install, the instructions were very clear. The timer itself is very sleek and looks great in the car. I love how you can set it to come on at a certain time or temperature, and how you can program it to run for a certain amount of time. It’s really easy to use and I love how it has a little light that comes on when it’s done running. Overall, I am very happy with this product and would highly recommend it to anyone!
Nismo Turbo Timer
Nismo Turbo Timer
Review
By Shawn on December 27, 2016
I have had this timer for a few weeks now and I’m very happy with it. Installation was simple and straightforward. The instructions that came with it were easy to follow and everything fit perfectly. The unit itself is very well made and feels very solid. The display is large and easy to read, even in direct sunlight. The buttons are also large and easy to press.
The timer has two modes, manual and automatic. In manual mode, you simply press the button to start the timer and then press it again to stop. In automatic mode, the timer will start automatically when you turn off the engine and stop when the preset time has elapsed. I’ve found that the automatic mode is very convenient and have been using it exclusively.
The timer can be set for 1, 2, 3, or 4 hours. I usually set it for 3 hours when I know I’ll be gone for a while. That way, I know the engine will be properly cooled down when I return.
Overall, I’m very happy with the Nismo turbo timer. It’s well made, easy to use, and does exactly what it’s supposed to do.
Apexi Auto Timer
Apexi Auto Timer: The Pros
This product is great for anyone who wants an easy to install and use timer. The product comes with simple instructions and all of the necessary hardware for installation. It was very easy to install and worked perfectly. The timer is adjustable so you can set it for however long you want your engine to run. This product is also great because it will automatically shut off your engine if it gets too hot, which is a great safety feature.
The Cons
The only downside to this product is that it is a bit pricey. However, it is worth the price because it is a high quality product that is very easy to use.
Defi Advance ZD Display Meter
The Defi Advance ZD Display Meter is one of the most popular and affordable options on the market for those looking for an easy to install and use display meter. This product has been designed for use with both 12 and 24 volt systems, making it a great choice for those with a variety of different needs. The large, easy to read LCD screen provides all of the information that you need in order to keep track of your progress and make sure that you are staying on target. The Defi Advance ZD Display Meter also features a self-calibrating feature that ensures accuracy and eliminates the need for constant recalibration. This product comes with a full one year warranty, making it a great investment for those who are looking for a reliable and durable option.
HKS EVC boost controller
The HKS EVC boost controller is one of the most popular and well-reviewed boost controllers on Amazon.com. There are a ton of positive reviews from happy customers who say that this boost controller has helped them take their driving experience to the next level.
Some of the things that people love about the HKS EVC boost controller include its easy installation, its simple and straightforward controls, and the fact that it provides an incredible amount of boost (up to 30 psi). There are also a few complaints about the HKS EVC boost controller, but they are mostly minor and can be easily overlooked.
Overall, the HKS EVC boost controller is an excellent choice for anyone looking for a high-quality, affordable, and easy-to-use boost controller. If you’re looking to take your driving experience to the next level, the HKS EVC boost controller is definitely worth considering.