Rack adapters are a must-have for any car lover who wants to add some personality to their ride. They are perfect for exterior accessories and make your car stand out from the rest. Here are the 10 best rack adapters of exterior accessories (2023 guide).
Table of Contents
Hopkins 43415 Brite-Tow Trailer Light Kit
The Hopkins 43415 Brite-Tow Trailer Light Kit is one of the best trailer light kits on the market. It is very well made and very easy to install. The kit comes with everything you need to get your trailer up and running in no time. The lights are very bright and easy to see, even in the daytime. The wiring harness is also very easy to install and is made of high quality materials. Overall, this is an excellent trailer light kit and I would highly recommend it to anyone needing a new set of lights for their trailer.
Optronics STTL76RB LED Trailer Tail Light
The Optronics STTL76RB LED Trailer Tail Light is one of the best trailer lights on the market. It is very bright and visible, even in the daytime. The light is also very durable and weatherproof. I have had mine for over a year now and it is still working great. The only downside to this light is that it is a bit expensive, but it is worth the money.
CURT 58140 Trailer-Side Connector
CURT 58140 Trailer-Side Connector
If you are looking for an easy way to connect your trailer to your vehicle, then the CURT 58140 Trailer-Side Connector is the perfect solution. This connector allows you to quickly and easily connect your trailer to your vehicle’s wiring harness, without having to splice into your vehicle’s wiring.
The CURT 58140 Trailer-Side Connector features a 4-way flat connector that is compatible with most standard trailers. This connector includes a dust cover to keep dirt and debris out of the connectors when not in use. The CURT 58140 Trailer-Side Connector also features a die-cast construction for lasting durability.
Installation of the CURT 58140 Trailer-Side Connector is quick and easy. Simply plug the connector into your vehicle’s 4-way flat trailer connector and you are ready to go. No splicing or cutting of wires is required.
The CURT 58140 Trailer-Side Connector is backed by a limited lifetime warranty.
Tekonsha 3050-P Brake Control Wiring Adapter
The Tekonsha 3050-P Brake Control Wiring Adapter is an essential piece of equipment for anyone who tows a trailer. It allows you to connect your brake controller to your vehicle’s wiring harness, so you can have full control over your trailer’s brakes. The adapter is easy to install and use, and it’s compatible with most brake controllers on the market.
Reese Towpower 74607 T-Connector
The Reese Towpower 74607 T-Connector is a great way to connect your trailer to your vehicle. It is easy to install and comes with all the necessary hardware. The instructions are clear and concise, making it easy to follow. The T-connector is made of high quality materials and is built to last. It is also backed by a limited lifetime warranty.
CURT 55242 Vehicle-Side Custom 4-Pin Trailer Wiring Harness
CURT 55242 Vehicle-Side Custom 4-Pin Trailer Wiring Harness Select vehicles are equipped with a 4-pin trailer connector for the towing of trailers or other external loads. This article will go over the wiring of a basic 4-pin trailer connector below: The first thing you need to know about 4-pin connectors is that there is no standard. That means that there are a number of different ways you might find a 4-pin connector wired when you go to hook up your trailer. However, there is one wiring configuration that is most common, and that is what we will focus on in this article.
The first thing you need to do is identify the functions of each pin on the 4-pin connector. In the most common configuration, the 1st pin (sometimes colored brown) is for the tail lights, the 2nd pin (usually colored yellow) is for the left turn signal and brake light, the 3rd pin (usually colored black) is for the right turn signal and brake light, and the 4th pin (usually colored white) is for the ground wire.
Once you know which function each wire serves, you can connect them to the corresponding wires on your vehicle. If your vehicle does not have a factory-installed trailer connector, you will need to install one. Fortunately, CURT makes a variety of custom vehicle-side connectors designed for easy plug-and-play installation.
To begin installation, locate the taillight assembly on your vehicle and remove the screws or bolts holding it in place. Next, disconnect the wiring harness from the taillights. You may need to cut away some of the plastic sheathing surrounding the wires in order to get to them. Once you have access to the wires, use a wire cutter/stripper to expose about ¾” of bare wire at the end of each one.
Now take your CURT custom vehicle-side connector and hold it so that the 4 pins are facing down. Take note of which pin corresponds to which wire function (tail light, left turn/brake, right turn/brake, ground). Then, match up each wire from your taillight assembly with the correct pin on your CURT connector, and use butt connectors or solder to make a secure connection. Be sure that each connection is wrapped in electrical tape or covered with shrink tubing to protect it from moisture and corrosion.
Now all that is left to do is reattach your taillight assembly and reinstall any fasteners that were removed earlier. Once everything is back in place, test your work by activating your turn signals and brakes while someone else watches the rear of your vehicle to see if the appropriate lights are illuminated. If everything is functioning properly, you are ready to hit the road!
Hopkins 48505 7-Way RV Blade Molded Trailer Connector
The Hopkins 48505 7-Way RV Blade Molded Trailer Connector allows you to connect your trailer to your vehicle. This connector features a molded trailer end with a 7-way blade style connector. It also has a weatherproof boot to keep your connection protected from the elements. The 48505 is easy to install and is backed by a lifetime warranty.
Nilight NI -WA 07 16AWG Leads Wiring Harness Kit
Nilight’s NI-WA 07 16AWG leads wiring harness kit is an excellent way to ensure that your electrical connections are clean and secure. The kit includes everything you need to make sure that your connections are correctly made, including a set of instructions that are easy to follow. The leads are made from high-quality materials and are designed to be durable and long lasting. They are also color coded to make it easy to identify which lead goes where. This kit is an essential part of any electrical installation and is a great value for the price.
Tow Ready 118540 T-One Connector
The Tow Ready 118540 T-One Connector is a great way to connect your trailer to your vehicle. It is easy to install and use, and it comes with all the necessary hardware for a complete installation. The connector is made of high-quality materials and is designed for durability and long-lasting performance. It is also backed by a limited lifetime warranty.
Hopkins 47205 Towing Wiring Harness
The Hopkins 47205 Towing Wiring Harness is one of the best towing wiring harnesses on the market today. It is easy to install and comes with everything you need to get it up and running in no time. The Hopkins 47205 Towing Wiring Harness is also very affordable and will save you money in the long run.
The Hopkins 47205 Towing Wiring Harness is made from high quality materials and is built to last. It is also backed by a lifetime warranty so you can be sure that it will stand the test of time. The Hopkins 47205 Towing Wiring Harness is also very easy to use and comes with detailed instructions.
If you are looking for a towing wiring harness that is easy to install and comes with everything you need, then the Hopkins 47205 Towing Wiring Harness is the perfect choice for you. It is affordable, durable, and easy to use, making it the perfect addition to your vehicle.